Fri. Feb 23rd, 2024

A concrete driveway costs from $65 per square metre on a flat surface, or more if the land is on a slope or if you choose a decorative finish. For the average size home, installing a plain concrete driveway will cost around $2,000. In most cases, it is recommended to wait at least 7 days before driving on a new concrete driveway. This waiting period allows the concrete to achieve sufficient strength to withstand vehicle traffic.

So, it’s often better to maintain and repair what you have rather than tear it down and rebuild using concrete. In addition to the repair type, extent of damage, and concrete finish, there are other potential expense factors to consider.

Read more about driveway installation akron here.

At worst, the concrete will crack and its strength will be compromised. Because curing is a necessary chemical reaction important to the strength development of concrete, you should give your concrete driveway all the time it needs to fully hydrate. In addition to the installation costs noted above, you can expect to pay approximately $1.00 per square foot for tear out and removal of your existing driveway. Small cracks also form over time, but removing these cracks is a DIY-friendly process, costing just $0.10 to $0.15 per linear foot. Installing a heated driveway costs $1,300 to $7,500, or about $12 to $25 per square foot, including installation and a new surface. It’s also a great investment in cold climates that extends the driveway’s longevity.

Not only does a concrete driveway last longer and require less maintenance than most other paving materials, it can help boost the resale value of your home by adding curb appeal. Concrete driveways require little in terms of ongoing maintenance—even less if they’re sealed. While an asphalt driveway may need to be repaired frequently and replaced within 15 to 20 years, a concrete driveway is less prone to damage from everyday living. Asphalt driveways require sealing every 3 to 5 years, but concrete driveways just need a little sealant to repair tiny cracks that may appear over time. Overall, a concrete driveway is a low-hassle and long-lasting choice for a driveway.

Read more about driveway installation akron here.

Take the first step by filling out the form below to find the top-rated concrete companies in your area. Prompt repairs can spell the difference between spending a few hundred dollars fixing your driveway and forking out thousands for a replacement. Throughout its 50-year lifespan, your highly durable concrete driveway may develop a few cracks or an entire section could sink and crack apart. Working with concrete can be expensive due to the cost of materials, the need for professional expertise, and long curing times.

How thick should a concrete driveway be?

Pros remove trees and rocks and level out the uneven ground, in addition to digging up and hauling away soil to achieve a proper grade. This type of land excavation and grading costs $0.50 to $1.50 per square foot, though is likely unnecessary for homeowners replacing an old driveway with a new one. Any shape beyond standard squares and rectangles requires contractors to specially build the forms, which translates to an increase in price. However, the actual increase mostly depends on your installer and how long it takes to pour and set your preferred design. For a larger, 24-by-24-square-foot driveway, you’ll pay an average cost of $2,300 to $4,600. Massive driveways necessitate more equipment, materials, and labor to complete the job. Driveway size, shape, and site conditions affect the total pouring time.

Avoid parking heavy vehicles, such as large trucks or RVs, on your driveway for extended periods. Also, be mindful of making sharp turns or sudden braking, as these actions can cause stress and potential cracking on the surface of the concrete.

Stamped concrete driveway cost

Yes, you should fix cracks in concrete as soon as possible, as they can widen if you don’t quickly fill them. Some epoxies dry and harden in as little as four hours, but some concrete patching compounds take several days to fully cure. Read the manufacturer’s instructions, and keep the area dry and unoccupied during curing. Spread and mix the concrete evenly to make sure the rocks are hidden under the cement binder. Pour wet cement into each form, paying attention that each corner is filled correctly. Seal your driveway after it has cured, then reseal it every few years to prolong its lifespan. Install a basic driveway rather than an elaborate stained or stamped driveway.

Typically, if a concrete apron has already been installed in a subdivision, the city is likely to waive any permits. This Old House mason Mark McCullough meets with homeowner Britt to discuss issues with her driveway. The pitch is too steep, and it is uneven and made up of a mix of asphalt, concrete, and gravel. Since replacing the pitch would involve reconfiguring the cement slab in the garage, Britt enlists Mark to pour a new concrete driveway. You’ll need to be able to pour the concrete fairly quickly, and wheel barrowing the concrete the length of a substantial driveway is labor-intensive. If you cannot get the concrete trucks in a position to pour their payload directly into your forms, consider hiring a concrete pumping contractor to place the material for you. However, it’s usually recommended to have your concrete driveway resealed every 5 years or so, which can cost from $30 to $60 per hour.

When it’s laid professionally and well maintained, a concrete driveway can last for 30 years or longer. This makes it a good value investment that can add value to your home.

Read more about driveway installation akron here.

Related Post

Leave a Reply

Your email address will not be published. Required fields are marked *